Warning: Missing argument 2 for wpdb::prepare(), called in /home/chinawh2/solarpanel-china.com/wp-content/plugins/category-icons/category_icons.php on line 1068 and defined in /home/chinawh2/solarpanel-china.com/wp-includes/wp-db.php on line 1246
Solar Water Heater, 200L Split Pressured Solar Water Heater - China Solar Panel

home > Product > Solar water heater > Split Pressured Solar Water Heater > Solar Water Heater, 200L Split Pressured Solar Water Heater

Product detail

  • Product Name:

    Solar Water Heater, 200L Split Pressured Solar Water Heater

  • Model No: CNCGC01-200-20

Description

Solar Water Heater, 200L Split Pressured Solar Water Heater Features

1.The heat collector and the water tank are separated, and the system works under pressure.
2. Intelligent controller to assure the system runs automatically.
3.The storage water tank could be placed in any place of the room.
4.The heat pipe collector and double loop system to ensure no freezing and the system could work all year.
5.The heat pipe collector, no water going into the tube, no bursting of tubes and it could heat the water at minus 50 degrees.
6.The electric heating water tank is applied, very convenient to use.
7.The water is supplied at the preset temperature, the highest temperature is set, the electrical heater is started at preset time, the memory protection is applied, and it could provide the hot water 24 hours per day.
8.The design is very elegant.
9.The SCM solar collector could placed anywhere such as the balcony, southern wall, sloping roof, rain shelter ,pitched roof…etc.
10.The module design and “building block” assembly, very convenient for the transportation and in harmony with the building.

Solar Water Heater, 200L Split Pressured Solar Water Heater Operating principal

1.The collector is made of the fourth solar collector—heat pipe SCM solar collector to transfer the solar power to heat power.
2. When the temperature of the solar collector(TC) is higher than the temperature of the outlet of water tank to some extent(TR), the controller will start the pump to work.
3.The circulating pump make the working medium circulate in the piping.
4.The heat exchanger transfers the heat of the solar collector to the storage water tank.
5. During the running of the circulating pump, when the temperature difference is lower than the set point, the circulating pump will stop.
6. When the temperature of the storage water tank(TR) reaches the preset highest point, the controller turns off the circulating pump.
7.The auxiliary electrical heater of the water tank could maintain the temperature of the water tank at preset point automatically.

Solar Water Heater, 200L Split Pressured Solar Water Heater Specifications

1. Solar collector  : 58mm*1800mm*20 1pcs
2. Inner tank: SUS304-2B food grade stainless steel
3. Outer tank: PVDF steel
4. Capacity: 200L
5. Daily temperature:45-90(℃)
6. Pressure: 0.6Pa
7. Heat preservation: 72hrs
8. Hail resistance: 25mm

related products

related keywords